Bathroom Renovation in Oakville
Four real projects show how showers, tubs, vanities, tile, storage, and tight footprints were resolved.
Local projectCompleted project cost examples
These are documented historical project costs for the scope and year shown. They are evidence from completed work, not a current quote for a different property.
The four documented rooms range from a large ensuite to a vanity-only upgrade and a compact angled shower.
Shower glass, waterproofing, tile, vanity dimensions, mirror sizes, and fixture locations affect one another.
The four historical figures cover different scopes. One is vanity-only; three include broader renovation work.
Continue exploring
Local proof
These completed projects show how storage, surfaces, fixtures, lighting, and maintenance priorities were resolved in real rooms.
Oakville · 2021
Historical project cost · CAD $23,000
View full case studyThis ensuite separates a freestanding tub and a large custom shower while using one long navy-blue vanity wall for two sinks and concentrated storage. Dark shower tile and black faucets create contrast, while brass-toned cabinet and shower details connect the vanity, glazing, and bathing area.
Oakville · 2020
Historical project cost · CAD $21,000
View full case studyA full-width black vanity organizes two sinks, drawer storage, and a tall centre cabinet within a bright primary bathroom. A freestanding tub, glass shower with a recessed niche, and separate toilet enclosure divide the room into distinct functions without blocking daylight.
Oakville · 2019
Historical project cost · CAD $3,000
View full case studyThis focused project replaced the vanity and countertop rather than renovating the full bathroom. Dark-charcoal stained maple-veneer slab fronts, six wide drawers, slim handles, and recessed custom legs create a long double vanity with substantial storage and a lighter floating appearance.
Oakville · 2020
Historical project cost · CAD $18,500
View full case studyA narrow irregular footprint was resolved with an angled frameless enclosure instead of forcing a rectangular shower into the room. Blue-green tile wraps the shower walls and ceiling, a built-in corner bench uses the rear of the enclosure, and a muted-blue vanity and framed mirrors carry the colour through the dry area.
These four Oakville projects show why a useful bathroom page needs more than a list of finishes. The six completed photographs record four different problems: arranging a large ensuite around a tub and separate shower, organizing a black double vanity and distinct wet zones, replacing only a vanity and countertop, and fitting an angled shower into a narrow irregular room. The project notes add the years, historical costs, materials, and scope limits that cannot be proved from a photograph alone.
The differences matter when planning a new bathroom. A CAD $3,000 vanity-only project cannot be compared with a CAD $23,000 renovation that includes a custom shower, freestanding tub, tile, cabinetry, fixtures, and installation. A photo can suggest a finish direction, but the written scope has to identify demolition, rough-ins, waterproofing, ventilation, electrical work, cabinetry, countertop, glass, fixtures, mirrors, paint, installation, exclusions, and uncertain conditions.
The 2021 ensuite is organized as three connected zones. A long navy-blue vanity wall handles two sinks and most of the storage. A freestanding tub sits beside the windows, and a large glazed shower occupies the darker end of the room. Keeping the shower glass clear allows daylight to move across the room instead of turning the enclosure into a visual wall. Oversized light floor tiles establish a calm base beneath the dark shower and vanity.
Details connect the zones without making every finish identical. Brass-toned pulls and shower fittings repeat across cabinetry and glass, while black faucets and dark shower tile add contrast. The tall vanity tower uses the countertop depth for storage without taking floor space elsewhere. The documented historical cost was CAD $23,000. The source note does not identify the countertop product or duration, so the page does not guess them.
The 2020 black-and-white bathroom also includes both a freestanding tub and a separate glass shower, but the storage composition is different. A full-width black spray-painted MDF vanity gives each sink its own drawers and cabinet space, while a narrow tall cabinet divides the mirror field and adds vertical storage. Matte-black faucets and light fixtures contrast with the white surfaces, and brass-toned cabinet pulls keep the dark cabinetry from becoming flat.
The wide completed photograph also shows a recessed shower niche and a separate toilet enclosure. These features depend on early coordination: the niche cannot conflict with framing or plumbing, the glass needs verified finished dimensions, and the toilet enclosure needs door and fixture clearances. The documented CAD $21,000 figure belongs to this historical bathroom scope. The exact countertop and tile products were not recorded.
The 2019 project is deliberately identified as custom vanity and countertop work only. It uses maple-veneer slab fronts with a dark-charcoal stain, six broad drawers, slim handles, and custom recessed legs. The legs lift the cabinet above the floor and create a floating appearance without relying on a fully wall-hung box. A Pure White quartz countertop keeps the long cabinet visually thin and gives the dark veneer a clear edge.
Its historical cost was CAD $3,000, but that figure excludes the work normally associated with a complete bathroom renovation. It should not be used as a bathroom price or averaged with the other three projects. For a similar vanity, current pricing would still depend on verified width, sink and faucet models, plumbing positions, veneer selection, drawer hardware, leg engineering, countertop fabrication, delivery, and installation.
The 2020 compact bathroom could not use a simple rectangular enclosure without consuming too much entry and vanity clearance. The frameless glass changes direction at the front corner, then opens into a taller shower volume with blue-green tile on the walls and ceiling. A built-in corner bench uses the rear of the enclosure, while a rain head, hand shower, controls, niche, curb, and drain are fitted around the narrow footprint.
The dry side uses a muted-blue spray-painted vanity, Cambria countertop and backsplash, black cabinet hardware, two matching framed mirrors, and patterned floor tile. Carrying the blue through the shower and cabinetry makes the unusual enclosure feel intentional. The recorded historical scope cost CAD $18,500. The photographs confirm the installed geometry and finishes, but the source note does not provide duration or product model numbers.
The finished photographs show glass, tile, drains, benches, niches, tubs, vanities, and mirrors. The hidden work is what keeps those finishes reliable: substrate preparation, waterproofing transitions, shower slope, drain connection, plumbing rough-ins, ventilation, electrical protection, blocking, and the tolerances required by the glass fabricator. Those decisions need to be coordinated before tile and cabinetry are ordered.
The two custom showers illustrate different geometry, but both depend on verified finished dimensions. Glass is measured after the critical surfaces are established, and the door swing, hinges, clamps, curb, bench, fixtures, and towel locations must not collide. Any permit or inspection requirements depend on the actual scope and should be confirmed for the property before work begins rather than assumed from a photograph or a past project.
The records show CAD $23,000 for the 2021 navy-blue ensuite, CAD $21,000 for the 2020 black double-vanity bathroom, CAD $3,000 for the 2019 vanity-and-countertop-only project, and CAD $18,500 for the 2020 angled-shower bathroom. They document completed work at different dates and with different quantities, products, site conditions, and exclusions. They are project evidence, not package pricing.
A current quote needs one written definition of scope. It should separate demolition, disposal, framing, plumbing, electrical, ventilation, waterproofing, tile, glass, cabinetry, countertop, mirrors, fixtures, painting, permits where applicable, delivery, installation, taxes, owner-supplied items, allowances, exclusions, schedule assumptions, and change rules. Two prices are comparable only when those definitions match.
Begin with the address, clear photographs of every wall, rough room dimensions, ceiling height, door and window positions, and a list of what needs to stay or change. Include the preferred tub or shower direction, number of sinks, storage needs, known leaks or slow drains, ventilation concerns, accessibility priorities, finish references, and the approximate timing. This is enough to begin a scope review without pretending that rough information is construction-ready.
Before pricing is finalized, verify site dimensions and the selected sink, faucet, tub, shower, toilet, lighting, mirror, hardware, tile, glass, vanity, and countertop requirements. The result should be a written scope and drawings that identify what is included, what remains an allowance, who supplies each item, how changes are approved, and what site conditions could alter the work. Yellow Pencil reviews selected Oakville bathroom and millwork projects based on scope and availability.
More options
Yes. Yellow Pencil reviews selected Oakville bathroom and custom millwork projects based on scope and availability.
They record four past scopes: CAD $23,000, $21,000, $3,000, and $18,500—not current package prices.
That 2019 scope covered a custom vanity and quartz countertop only. It did not include a full bathroom renovation.
Yes. Project 4 uses an angled glass enclosure and bench to fit a narrow irregular footprint.
Yes, when space and plumbing allow. Projects 1 and 2 show separate tubs and glazed showers.
Confirm dimensions, fixtures, plumbing, storage, countertop, mirror, lighting, hardware, and clearances.
Send the address, photos, rough dimensions, priorities, fixture ideas, finishes, timing, and known issues.